Image Width (pixels):


Надым стойки малый фильтровальный зал

Analyzed File: ASY NDM_VOS pillar 2.iam
Autodesk Inventor Version: 2025 (Build 290162010, 162A)
Creation Date: 09.11.25, 16:54
Study Author: admin
Summary:

Static Analysis:1

General objective and settings:

Design Objective Single Point
Study Type Static Analysis
Last Modification Date 09.11.25, 16:52
Model State [Primary]
Design View Default
Positional [Primary]
Detect and Eliminate Rigid Body Modes No
Separate Stresses Across Contact Surfaces No
Motion Loads Analysis No

iProperties

Summary

Authoradmin

Project

Part NumberASY NDM_VOS pillar 2
Designeradmin
Estimated Cost0,00 ₽
Creation Date09.11.25

Status

Design StateWorkInProgress

Physical

Mass25,7595 kg
Area2228500 mm^2
Volume3281470 mm^3
Center of Gravityx=0 mm
y=-62,5476 mm
z=635,614 mm

Note: Physical values could be different from Physical values used by FEA reported below.


Mesh settings:

Avg. Element Size (fraction of model diameter) 0.1
Min. Element Size (fraction of avg. size) 0.2
Grading Factor 1.5
Max. Turn Angle 60 deg
Create Curved Mesh Elements No
Use part based measure for Assembly mesh Yes

Material(s)

Name Generic
General Mass Density 1 g/cm^3
Yield Strength 0 MPa
Ultimate Tensile Strength 0 MPa
Stress Young's Modulus 0,0000001 GPa
Poisson's Ratio 0 ul
Shear Modulus 0,00000005 GPa
Part Name(s) NDM-VOS pillar 2 sketch.ipt
Reference Skeleton
Name Steel, Mild
General Mass Density 7,85 g/cm^3
Yield Strength 207 MPa
Ultimate Tensile Strength 345 MPa
Stress Young's Modulus 220 GPa
Poisson's Ratio 0,275 ul
Shear Modulus 86,2745 GPa
Part Name(s) ISO 10799-2 60x40x3 - 1600
ISO 10799-2 60x40x3 - 600
ISO 10799-2 40x40x2 - 863,76
Name Steel
General Mass Density 7,85 g/cm^3
Yield Strength 207 MPa
Ultimate Tensile Strength 345 MPa
Stress Young's Modulus 210 GPa
Poisson's Ratio 0,3 ul
Shear Modulus 80,7692 GPa
Part Name(s) NDM-VOS pillar 2 plate 1.ipt

Operating conditions

Force:1

Load Type Force
Magnitude4000,000 N
Vector X0,000 N
Vector Y-0,000 N
Vector Z-4000,000 N
Selected Face(s)

Fixed Constraint:1

Constraint Type Fixed Constraint
Selected Face(s)

Contacts (Bonded)

Name Part Name(s)
Bonded:1Frame 1762693866842:1/ISO 10799-2 40x40x2 - 863,76:1
NDM-VOS pillar 2 plate 1:4
Bonded:2Frame 1762693866842:1/ISO 10799-2 40x40x2 - 863,76:2
NDM-VOS pillar 2 plate 1:3
Bonded:3Frame 1762693866842:1/ISO 10799-2 60x40x3 - 1600:3
NDM-VOS pillar 2 plate 1:1
Bonded:4Frame 1762693866842:1/ISO 10799-2 60x40x3 - 600:3
Frame 1762693866842:1/ISO 10799-2 60x40x3 - 1600:3
Bonded:5Frame 1762693866842:1/ISO 10799-2 60x40x3 - 600:4
Frame 1762693866842:1/ISO 10799-2 60x40x3 - 1600:3
Bonded:6Frame 1762693866842:1/ISO 10799-2 60x40x3 - 1600:4
NDM-VOS pillar 2 plate 1:2
Bonded:7Frame 1762693866842:1/ISO 10799-2 60x40x3 - 600:3
Frame 1762693866842:1/ISO 10799-2 60x40x3 - 1600:4
Bonded:8Frame 1762693866842:1/ISO 10799-2 60x40x3 - 600:4
Frame 1762693866842:1/ISO 10799-2 60x40x3 - 1600:4
Bonded:9Frame 1762693866842:1/ISO 10799-2 60x40x3 - 1600:3
Frame 1762693866842:1/ISO 10799-2 40x40x2 - 863,76:1
Bonded:10Frame 1762693866842:1/ISO 10799-2 60x40x3 - 1600:4
Frame 1762693866842:1/ISO 10799-2 40x40x2 - 863,76:2

Results

Result Summary

Name Minimum Maximum
Volume 3281470 mm^3
Mass 25,7595 kg
Displacement 0 mm 0,486958 mm
Safety Factor 1,20197 ul 15 ul
Stress XX -143,761 MPa 141,743 MPa
Stress XY -35,4769 MPa 32,4423 MPa
Stress XZ -69,2538 MPa 67,4416 MPa
Stress YY -90,7273 MPa 85,5937 MPa
Stress YZ -49,325 MPa 59,2994 MPa
Stress ZZ -156,241 MPa 65,7475 MPa

Figures

Displacement

Safety Factor

Stress XX

Stress XY

Stress XZ

Stress YY

Stress YZ

Stress ZZ


C:\Users\admin\Yandex.Disk\home pc\Inventor\NDM-VOS_powder_hopper\400 tube\ASY NDM_VOS pillar 2.iam


Image Width (pixels):